What do I need to do to my ReefBot if it has not been used for more than 10 days? : Reef Kinetics

What do I need to do to my ReefBot if it has not been used for more than 10 days? Print

Created by: Reef Kinetics

Modified on: Wed, 25 Sep, 2019 at 11:47 AM

1- Put the "Tank" tube in RODI

2- Run any test

3- When done, remove "Tank" and "RODI" tubes and run a test without any water

4- Remove all the tubes from the bulkheads

5- Drain the tubes

6- Store the device in a dry place with no direct sunlight or heat source

Reef is the author of this solution article.

Did you find it helpful? Yes No

Help Desk Software by Freshdesk