General

How far can the unit be placed away from the tank?
You can use up to 2 meter tubes to connect the ReefBot to your Tank. Just follow the below visual to setup your ReefBot and you are good to go.
Thu, 2 May, 2019 at 3:12 PM
How large is the RODI water tank? Is a holding tank in the machine or do I need a separate container to hold the RODI water.
We do not supply RODI containers with the ReefBot. You can use any RODI container you want.
Wed, 27 Feb, 2019 at 3:38 PM
When do I clean the reaction and rinsing chambers and how?
Clean the reaction and rinsing chambers every 100 tests or whenever needed by following the procedure below: • Soak both chambers with warm (not hot) water...
Tue, 27 Nov, 2018 at 4:02 PM
When do I replace the syringe and needle on my ReefBot?
You need to change them every 60 tests or whenever needed.
Fri, 27 Mar, 2020 at 4:18 PM
When do I replace the pump heads?
You need to replace them every 6 months or at any sign of malfunctioning.
Wed, 4 Dec, 2019 at 10:28 AM
Stable Setup and Calibration
Stable Setup and Calibration: It is possible to mount the device directly on a wall, or just let it stand on a flat surface.  The height difference be...
Fri, 20 Mar, 2020 at 2:13 PM