Hardware

I currently have an indication of no lights on the LED indicators. What does that mean?
Check first if the device is working properly. If yes, then what you need to do is the following: 1- Remove the back acrylic panel 2- Unplug and pl...
Wed, 20 Mar, 2019 at 2:48 PM
My testing chamber is overfilling. What can I do?
If your testing chamber is overflowing, the draining pump could be the issue. You need to do the following 1- Remove the back acrylic panel 2- Remo...
Wed, 20 Mar, 2019 at 2:57 PM
What do I need to do to my ReefBot if it has not been used for more than 10 days?
1- Put the "Tank" tube in RODI  2- Run any test 3- When done, remove "Tank" and "RODI" tubes and run a test without any wate...
Wed, 25 Sep, 2019 at 11:47 AM
How do I replace pump head?
Here are the instructions for the replacement of the pump heads: 1- Remove the back cover of the device using the 2.5mm Allen Key provided. 2- Unplug t...
Wed, 4 Dec, 2019 at 3:16 PM