Dos:
Connect “WASTE” to waste container with the 2 meter silicon sample tube and connect “RODI” and “TANK” with the 2 meter silicon sample tube.
Make sure the RO is full and waste is empty by checking them through the App.
Shake the reagents from 2-4 minutes or as indicated by the test kits before emptying them in our glass vials.
Label all the vials with the correct parameter and reagent names before placing them in the ReefBot vial’s rack.
Make sure the glass vials has one magnetic stirrer placed inside before emptying the reagents.
Make sure that both the testing and RO chambers include a magnetic stirrer before any tests and calibration.
Donts:
Don’t remove the PTFE from the glass vials.
Don’t run a test while the cover is removed.
Don’t restart or turn the power off while you are running a test.
Don’t run tests before placing magnetic stirrers in both the testing and RO chambers.
Don’t switch caps or vials between different reagents.
Don't connect the RODI straight to an RODI filter. Always use a 0 TDS DI water.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article